• Flooring type: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
• Material: plastic equipped with scratch-proof polyamide fibres.
• Installation: one-time mounting of the screw-on/stick-on base part, replaceable glide foot.
• Glide surface: 35×18 mm. Is the surface wider than 25 mm? Use our Multifixx instead.
• Furniture height: furniture is raised by a maximum of 11 mm.

The base part is equipped with a self-adhesive strip and additionally comes with two self-tapping screws.

The self-adhesive strip is only suited for use on metal surfaces (degrease thoroughly prior to applying the base part). On all other surfaces such as plastic or wood, the base part must be mounted with the provided screws.

Please note that our glides require occasional maintenance.

• Clean and degrease the surface to be covered, for example with an alcohol wipe. If the surface is made of plastic (PP or PE), a primer for PP/PE must be applied beforehand!
• Remove the protective film and firmly stick the base part onto the surface. On wood and plastic surfaces, this step prevents the base part from shifting before it is screwed in.
• If needed, use a drill to pre-drill holes through the screw holes in the base part, each with a diameter of 3 mm. (Optional for metal surfaces)
• Carefully screw in the 2 supplied screws until the screw heads are fully recessed into the base part. (Optional for metal surfaces)
• Click the protective foot onto the base part until it is securely attached.