Magic in a Bottle Anti-Slip Treatment bath treatment causes a chemical reaction with the surface, creating an "Invisible Tread" on enamel baths or showers to increase the slip resistance and reduce the chance of slip injury associated with wet surfaces, without noticeably effecting the surfaces appearance. Approximate application time 5 minutes from start to finish and the tub can be put back to use immediately

“The wetter the bath, the more effective the slip-resistance”.

This amazing treatment works by gently creating microscopic invisible pin holes in the silica of the enamel. These pin holes act as a vacuum that when pressure is applied under water the foot is sucked to the floor whilst squeezing out the water.

This type of product is widely used throughout the world in hotels, hospitals, care homes elderly residential and domestic homes, and any area where slip accidents may occur. In the UK we have sold our Magic in a Bottle anti-slip treatments to: Hilton, Waldorf, Browns, Marriot, Sunrise Care Home, 2000 baths for Forest Holiday Resorts every year. Totalling over 4000 baths, showers every year.

Customer
Reviews

Hi Glenn,
It has reduced our ‘slips in bath’ accident statistics down to zero, we’ve had no bath slips in any treated bath. It was the perfect solution for us, and I imagine many other people in the future.

Andrew Willison National Health and Safety Coordinator – Forest Holidays

Reviewer: Chris Thomas from Maintenance Engineer - London

I work at a major hotel in London and need a quick solution for our enamel baths.
This was perfect.
Our maintenance team applied it to all the baths over a week and it has really boosted the safety of the surface - other than that we were looking at possible replacement.

Magic in a Bottle

1. Clean and dry the surface thoroughly – does not work on plastic / acrylic baths.

2. Place on suitable PPE

3. Slowly pour half (50ml) over the bottom of the tub / tray and spread around all the bottom of the tub using a nonabsorbent cloth.

4. Let the product dwell on the surface wet for 4/5 minutes topping up halfway through with the reaming 50ml. Do not let dry out. The product only works in liquid form

5. After 4 / 5 minutes – Thoroughly rinse away using a shower or jug of water until all the bubbles have gone. That’s it

6. Test: Pour water from an untreated section onto a treated section and with pressure using some kitchen roll wipe from the untreated bath to the treated section or better still add some water to the bath and try and slide your barefoot across the surface to feel the grip.

7. The tub can be put back to use immediately.

Avoid contact with eyes – do not ingest – keep out of reach of children.

Limitation of Liability

Products are guaranteed not to be defective when applied and used in accordance with the guidelines. Because of the great variations of environments and application techniques, the liability is limited to the replacement of the product. It is the user’s responsibility to determine if the product is suitable and creates the correct amount of safety and we cannot be held liable for any damage caused by the treatment. Always test a small area to determine if the product is suitable.

Floor Safe Ltd – Registered in England and Wales No: 4955370